维多利亚老品牌值得信赖(集团)公司官方网站

智能家居应用晶振Q24FA20H0035200石英晶体谐振器

本文关于石英晶振参数测量方法

1.振荡器频率的测量

功率(驱动电平)的计算公式：DL(功率)=(Ix)2×Re; 其中Ix：有效电流值(rms)，Re：有效电阻，Re = R1 x（1 + C0 / CL）2，R1：串联电阻

3.负电阻的测量负电阻用于确定振荡电路的振荡裕度并预测振荡的稳定性。 如下图所示，将可变电阻（VR）与晶体串联，然后逐渐增加电阻。 晶体将以某个值停止振荡。

负阻（-R）的计算公式：| -R | = VR + Re，Re = R1 x（1 + C0 / CL）2，R1：串联电阻

爱普生石英晶振的参数物特性:被制作的AT切割的水晶振动子根据AT切割石英晶体谐振器的谐波模式不同的水晶片的厚度也不同.(1)晶振晶体的厚度和振荡频率之间的关系(2)频率温度特性标准例(3)石英水晶振荡子的等效电路和等效定数(4)根据等效定数和负载电容计算的项目

每天都会接到很多晶振客户的询盘,有的是工厂采购,有的是贸易商采购,有的是EMS代工厂采购员等等.每天都有上百个咨询石英晶振参数报价及拿货订货.也有很多客户经常会"一问三不知",什么是一问三不知,就是我们石英晶振销售人员口中经常说的参数,尺寸,封装.并不是每一个来咨询问料的客户都是能很清楚明白的知道晶振都有哪些参数.这也跟专业性有关吧,毕竟我们是专业做晶振这一块的,对于刚接触晶振的采购人员来说就是一个未知领域,就像我一样,我从事石英晶振销售三年有余,虽然说是从事电子行业的人员,但我却对其它电子产品”一概不知”.什么电容电阻二三极管,到现在为止我都还不知道他们到底长啥样.虽然客户发过来的电路板上是会有这些产品出现,但我却认不出来.只能从板子里认出晶振,然后估出大概尺寸,看出哪个品牌.我们公司从事晶振行业18年有余,一直坚守晶振行业这个领域的事业.现在给大家介绍一下<什么是晶振的具体参数>,<晶振的专业术语>.

Every day, I receive a lot of enquiries from crystal customers, some are factory procurement, some are traders, some are EMS foundry buyers, etc. Every day, there are hundreds of consulting quartz crystal parameters and get orders. Many customers often "One question, three don't know", what is one question, three, I don't know, it is the parameters, size, and packaging that we often say in the quartz crystal sales staff. Not every customer who consults can know clearly what crystals are. Parameters. This is also related to professionalism. After all, we are specialized in crystal oscillators. It is an unknown field for purchasers who are just in contact with crystal oscillators. Like me, I have been engaged in the sales of quartz crystal oscillators for more than three years, although I am a person in the electronics industry, but I don’t know about other electronic products. I don’t know what capacitors and diodes are. So far, I don’t know how long they are. Although the customer’s board will be there. These products appear, but I can't recognize them. I can only recognize the crystal oscillator from the board, and then estimate the approximate size to see which brand. Our company is engaged in crystal oscillators. More than 18 years, we remain firmly committed to the cause of the crystal industry in this area and now tell you about .

首先就是我们经常有问到的,标准频率以及频率偏差也称之为精度.(Nominal Frequency and Tolerance)

The first is what we often ask. Standard frequency and frequency deviation are also called accuracy. (Nominal Frequency and Tolerance)

在正确的振荡线路匹配下,从振荡线路输出的频率称之为”公称频率”.石英晶体谐振器的频率通常都是以兆赫兹(MHZ)或者千赫兹(KHZ)来表示.而频率偏差则是在实际批量生产及振荡线路应用上,产品在室内环境25度中都会有一些相对于中心频率的频率误差.这一类的频率容许误差的最大散布值,一般是有ppm(parts per million)或者%(percent)来表示.

Under the correct oscillating line matching, the frequency output from the oscillating line is called the “nominal frequency.” The frequency of the quartz crystal resonator is usually expressed in megahertz (MHZ) or kilohertz (KHZ). The frequency deviation is In actual mass production and oscillating line applications, the product will have some frequency error relative to the center frequency in the indoor environment of 25 degrees. The maximum dispersion value of this type of frequency tolerance is generally ppm (parts per million). Or %(percent) to indicate.

其次就是石英晶振的基本波振荡和倍频振荡模态简称”泛音振动”. (Fundamental and Overtone Vibrations Mode)

The second is the fundamental wave oscillation of the quartz crystal oscillator and the frequency doubling oscillation mode referred to as "overtone vibration". (Fundamental and Overtone Vibrations Mode)

AT切割型的石英晶振主要以厚度剪切振荡模式存在,高次谐振动波与电极区域之间的基本振动共存.由于两个电极的极性相反,在压电石英晶体谐振器中只能激发奇数谐波振动.

The AT-cut quartz crystal oscillator mainly exists in the thickness shear oscillation mode, and the high-order harmonic vibration wave coexists with the basic vibration between the electrode regions. Since the polarities of the two electrodes are opposite, only the piezoelectric quartz crystal resonator can be excited. Odd harmonic vibration.

再然后就是相当主要的负载电容了(Load capacitance),负载电容CL是振荡器通过谐振器两端观察电路时所呈现出的电容量,负载电容形式上与谐振器串联或者并联,对于并联负载情况,CL的存在将影响并联谐振频率,而并联负载谐振频率FL由下面工式给出,所以在咨询型号参数的时候,这个参数必需是客户指定参数.

Then there is a fairly large load capacitance. The load capacitance CL is the capacitance that the oscillator exhibits when observing the circuit through the resonator. The load capacitance is in series or parallel with the resonator. For parallel load conditions. The presence of CL will affect the parallel resonant frequency, and the parallel load resonant frequency FL is given by the following equation, so when consulting the model parameters, this parameter must be the customer-specified parameter.

在晶振购买过程中，这些参数都是用得较多的几个参数了.其实还有很多参数还没介绍完,明日再继续更新最新的晶振参数说明.希望可以帮助那些想要了解晶振,并且采购晶振的客户去了解更多的信息资料.